Boy Scout patch placement follows official BSA guidelines that assign specific locations for every badge on the uniform. Rank patches go centered on the left chest pocket. The American flag goes on the right shoulder. 

Council and troop numbers go on the left sleeve. Merit badges belong on the sash only, never on the shirt. Temporary patches go on the right pocket. Wood badge patches are worn around the neck.

Why Patch Placement Matters in Scouting

Understanding where do boy scout patches go on uniform is more than just about looking neat. BSA patches carry deep tradition and significance:

• A scout’s uniform communicates rank, unit identity, role, and achievement at a glance.
• Correct placement reflects the scout’s commitment to BSA standards – and it’s checked at uniform inspections.
• Getting it wrong is noticeable to troop leaders, parents at ceremonies, and scouts themselves.
• Beyond compliance: every patch tells part of the scout’s story – placement is how that story is read correctly.
• The uniform is described in BSA publications as “the most visible symbol of scouting,” meaning it carries weight that starts with the correct scout uniform patches placement.

Understanding the BSA Uniform — Left vs Right, Pockets vs Sleeves

Before covering where each patch goes, explain the geography of the uniform:

The left side: rank, council, and personal achievement

• Left chest pocket: rank badge centered on the pocket itself, not the flap.
• Left sleeve upper: council shoulder patch directly below the shoulder seam.
• Left sleeve middle: troop number patch below council patch.
• Left sleeve lower: Patrol emblem placement is directly below troop numerals.
• World Crest patch placement: centered above the left pocket, above all other insignia.
• Note: the left side of the uniform represents the scout’s current assignment and identity.

The right side: activities, flag, and temporary recognition

• Right shoulder: American flag patch scout uniform placement dictates stars facing forward, toward the front of the body.
• Right sleeve: Outdoor Activity Award, activity badges for Cub Scouts.
• Right chest pocket: temporary patch – only ONE worn at a time per BSA guidelines.
• Note: the right pocket is for temporary patches like camp patches, jamboree patches, and event patches – displayed one at a time and rotated as milestones accumulate.

The merit badge sash

• Worn diagonally over the right shoulder, draping to the left hip.
• Merit badges arranged in horizontal rows, starting from the top.
• Back of sash: temporary patches only, not mixed with merit badges on the front.
• Sash is worn on formal occasions, ceremonies, and official events, not necessarily every troop meeting.

Rank Patch Placement — From Lion to Eagle Scout

Cub Scout rank patches (Lion through Arrow of Light)

• Placement: center of left chest pocket.
• Cub Scout ranks in order: Lion, Tiger, Wolf, Bear, Webelos, and Arrow of Light.
• Key difference from Scouts BSA: Many Cub Scout packs do not replace old rank patches with new ones but keep them all above the new rank in descending order – check with the pack leader.
• Arrow of Light patch (highest Cub Scout honor): placed below left chest pocket when wearing Cub Scout uniform.
• This prestigious patch is transferable to a Scouts BSA uniform after the crossover of scouts.
• Cub Scout pack-specific note: Cub Scout pack-specific patches, den numbers, and activity patches have unique placement guidelines. Please verify with pack leaders.

Scouts BSA rank patches (Scout through Eagle Scout)

• Placement: Placed centered above the left pocket of the shirt, positioned above the pocket itself and not the flap.
• Ranks in order: Scout, Tenderfoot, Second Class, First Class, Star, Life, and Eagle Scout.
• The new rank pin takes precedence over any other previously worn pins that were pinned above the left pocket. Previously worn rank pins could not be pinned simultaneously with the newly earned one.
• Spacing: Pin is to be positioned 1/4 inch below the pocket’s seam; horizontal centering.
• Eagle Scout rank badge: Highest rank badge in Boy Scouts of America, pinned above the left pocket alongside the Eagle Scout medal.

Eagle Scout-specific placement notes

• Eagle Scout patch placement: This should be sewn in the left chest pocket just like any other rank.
• Eagle Scout Award medal: The medal should hang from the ribbon worn around the neck.
• Eagle Scout square knot device: This should be worn above the left pocket in the shirt.
• Eagle Scout patch on the merit badge sash: An Eagle Scout patch may be worn on the sash.
• Parents and Leaders note: It should be noted that the Eagle Scout rank is earned and not bought.
• Intellectual Property Concern: The reproduction of Eagle Scout patches should be done in accordance with the BSA Intellectual Property Policies.’

Merit Badge Placement — The Sash

A common mistake: parents assume the merit badge placement goes on the uniform shirt. They don’t.

• Boy scout merit badge placement means these patches belong exclusively on the merit badge sash.
• Sash drapes over the right shoulder to the left hip, worn at ceremonies and formal occasions.
• Start rows from the top of the sash and work downward as the collection grows.
• Keep rows horizontal and evenly spaced – the visual organization reflects the scout’s care and pride.
• When the front of the sash is full, badges continue on the back.
• Required vs. elective merit badges: Eagle-required badges (currently 14) can be displayed anywhere on the sash, there is no rule requiring them to be in a specific location within the sash.
• Temporary patches made often as custom embroidered patches scouts go on the back of the sash only, never mixed with merit badges on the front.

Sleeve Patches — Left Sleeve Breakdown

The guide to shoulder sleeve insignia BSA:

Council shoulder patch (top-left sleeve)

• Placed directly below the left shoulder seam.
• Represents the geographic council the scout is registered with, one of 250+ local councils across the USA.
• No space between shoulder seam and the top edge of the council patch.

Troop numerals (below council patch)

• Placed below the council patch, with 1/4 inch spacing between them.
• The troop’s BSA-registered number.
• Centered on the sleeve beneath the council patch placement.

Patrol emblem (below troop numerals)

• Placed below the troop numerals, consistent 1/4-inch spacing.
• Represents the scout’s patrol within the troop (Eagle, Hawk, Falcon, Wolf, etc.).
• Centered on the sleeve beneath the troop numerals.

Position of responsibility patches

• Senior Patrol Leader, Patrol Leader, and Assistant positions have their own patches.
• Placed on the left sleeve, below patrol emblem.
• Note: leadership position patches are placed per the current BSA Insignia Guide – verify specific positions with your troop’s committee.

American Flag Patch — Right Shoulder Rules

• Placed at the top of the right sleeve, directly below the shoulder seam.
• Stars face forward – toward the front of the body, the same principle as on military uniforms.
• The flag appears “reversed” to the casual observer but is correct per US flag code: the union (stars) always faces the direction of forward movement.
• This is the same rule applied to US military uniforms.
• No other patches go above the flag patch on the right sleeve.

Temporary Patches — Right Pocket and How to Rotate Them

• Temporary patches BSA placement guidelines allow ONE temporary patch on the right chest pocket at a time.
• Temporary patches include camp patches, high-adventure patches, jamboree patches, council event patches, and special recognition patches.
• The patch is worn until the scout decides to rotate to the next earned temporary patch.
• Additional temporary patches can be displayed on the back of the merit badge sash.
• Custom event patches, troop anniversary patches, and fundraiser recognition patches are all temporary patches – troops frequently order custom embroidered versions for memorable events.

Order of the Arrow Patch Placement

• OA is the BSA’s honor camping society, one of the most prestigious achievements in scouting.
• OA lodge flap: worn on the right chest pocket flap, replacing the standard pocket flap.
• OA sash: worn over the right shoulder on full-dress occasions – separate from the merit badge sash.
• OA rank patches (Ordeal, Brotherhood, Vigil Honor): worn on the OA sash.
• Vigil Honor: highest level of OA recognition, its patch placement on the OA sash is a mark of exceptional service.

Cub Scout Patch Placement — Key Differences from Scouts BSA

Cub Scout patch placement guide rules are tailored for a distinct audience with separate needs. Parents of younger scouts will find key differences from the traditional older scout uniforms: 

Cub Scout Patch Type	Correct Placement Guideline
World Crest	Centered above the left pocket (same as Scouts BSA).
Den number patch	Right sleeve vs. troop numerals on the left sleeve for Scouts BSA. This is the placement that trips up most new parents.
Pack numerals	Placed on the left sleeve.
Activity badges	For Webelos: on the right sleeve below the den number.
Bobcat badge	On the left pocket when earned, then moves to make room for advancing ranks in some packs.
Adventure loops and pins	See your Cub Scout pack’s specific guidelines – these vary more than rank patches.
Arrow of Light	Final Cub Scout rank; placement same as other ranks on left pocket.

How to Attach Boy Scout Patches — Sew-On, Iron-On, and When to Use Each

A comprehensive look at how to attach Boy Scout patches:

Sewing (recommended for all permanent patches)

• Strongest, most durable attachment – survives years of meetings, camping, hiking, and washing.
• Use thread that matches the patch border color for a clean, nearly invisible stitch. A backstitch around the perimeter provides the most secure hold.
• Tips for parents: pin the patch in place first. Start from the back of the fabric; keep stitches even at 2-3mm spacing.
• Don’t want to sew? Many dry cleaners and tailor shops attach patches for a few dollars per patch. If you decide to DIY, read more on how to sew on a patch.

Iron-on (for temporary patches and casual use)

• Works well for temporary patches that will be rotated off the right pocket.
• Not ideal for permanent rank or council patches that need to survive years of wear.
• Best practice: use iron-on to tack the patch in position, then sew around the edge – the best of both methods.
• Iron-on settings for scout uniforms: medium heat, pressing cloth between iron and patch, 30-45 seconds of firm pressure, no steam. For difficult fabrics, review how to prevent iron-on patches falling off.
• Let cool completely before touching – at least 2 minutes. Ensure you follow proper techniques when exploring iron on patches.

Velcro (for interchangeable and temporary applications)

• Some scout gear (bag patches, backpack patches, certain merit sashes) accept Velcro-backed patches.
• Most useful for repeatedly swapping patches rather than permanent display.
• Not standard for shirt-based BSA uniform patches.
• Check with your troop before using Velcro on the uniform shirt. For alternative gear, explore Velcro patches.

Custom Patches for Scout Troops — When Troops Order Their Own

At Patch Makers USA, troops regularly order custom event patches for jamborees and council events, here is what works.

• Troops order custom scout patches for council events, jamborees, anniversary celebrations, summer camp, Eagle Scout ceremonies, and troop fundraisers.
• Custom patches serve as temporary patches – worn on the right pocket or sash back, then saved as keepsakes.
• Design considerations for scout event patches:
  • Keep it readable at small sizes (2-3 inches in diameter is most common).
  • Include year, event name, troop number, and a visual element.
  • Custom embroidered patches are the BSA standard – they match the look and feel of official insignia. For personalizing gear, don’t forget custom name patches.
• Iron-on backing allows easy temporary wear; sew on if the troop wants them more permanent.
• Ordering in advance: Cub Scout patches typically take 07-10 business days from proof approval – plan event patches at least 3-4 weeks ahead.
• No minimum order: troops of any size – from 6 scouts to 60 – can order the exact quantity they need.

Patch Care — Keeping Scout Uniforms Looking Sharp

• Wash on a gentle cycle, cold water, inside-out whenever possible.
• Tumble dry on low or air dry, high heat degrades both iron-on adhesive and thread over time.
• For heavily patched uniforms: lay flat to dry to prevent pulling at patch edges.
• If a patch begins to lift at an edge: re-press with iron (pressing cloth + 30 seconds) or tack with a few stitches.
• Store patches not yet applied in a cool, dry place, avoid direct sunlight, which fades embroidery colors.

Frequently Asked Questions

Where does the rank patch go on a Boy Scout uniform? 

Rank badges are sewn in the center of the left pocket of the uniform shirt, that is, on the pocket, not the pocket flap. The next badge takes the place of the previous badge on the pocket as the boy progresses. In Cub Scouts, most packs place badges for previous ranks vertically above the current rank on the pocket. For Scouts BSA, however, only the current rank should be displayed.

Do merit badges go on the shirt or the sash? 

All merit badges go on the merit badge sash and never with other core uniform patches on the shirt.

Where does the American flag patch go on a scout uniform? 

It can be found on the upper portion of the right sleeve, below the shoulder line. The thing that should be noted here is that the stars should always face forward, as in military uniforms.

How do you attach patches to a Boy Scout uniform? 

To get permanent patches, ironing first will help ensure accurate placement, and sewing afterwards will create a lasting hold.

Can you iron on Boy Scout patches?

The “how to iron on Boy Scout patches” process is detailed below. Iron-on application processes will serve effectively on the event patches that need to be applied to the right chest pocket, while the scoutmasters always opt for sewing methods for more permanent patches such as rank, council shoulder, troop number, and patrol patches. This is because the glue that is used in ironing melts within a few washes due to its composition of polyester and cotton blend uniforms.

What is the correct placement for Order of the Arrow patches? 

Wear the OA lodge flap on the right chest pocket flap. This OA flap is in place of the normal pocket flap. For full dress events, the OA sash should be worn over the right shoulder separately from the merit badge sash. Rank patches of OA such as Ordeal, Brotherhood, and Vigil Honor are worn on the OA sash, and the Vigil Honor rank patch is the highest rank patch.

Ready to Create Custom Patches for Your Next Troop Event?

Well-placed Boy Scout patches for uniforms are the initial step towards displaying troop pride, but the display of personal milestones makes this process even more personalized. Whether you are preparing yourself for a summer camp, jamboree, Eagle Scout pinning ceremony, or any council function, custom-made event patches are a great temporary patch and an excellent memento to keep forever. 

At Patch Makers USA, the process will be as simple as possible for you. We specialize in producing customized embroidered patches that have the same appearance as BSA patches, and we are capable of delivering within only 10-14 working days after approval of your proof.